Through the use of this website, you are accepting the terms and conditions stipulated in our Privacy Policy and our use of cookies.

Wanship Testing Site

Nestled in the beautiful Wasatch Mountains approximately 30 miles east of Salt Lake City is VPI Laboratories Wanship open area test site. There are two fully enclosed testing facilities designed for testing of equipment at distances of 3 and 10 meters. The fully enclosed testing facilities are covered by a fiberglass building. There are no metal obstructions above the reference ground plane to ensure low RF reflection. The ground plane is solid metal with continuous welds at each seam. Control and measurement equipment are located in a screened room below the ground plane. An automated metal turntable is provided which is mounted flush with the ground plane. The turntable is 12 feet in diameter and has a load rating of 4000 lbs. A map to the facility can be downloaded below.

VPI Laboratories test facility is equipped to perform testing to a wide variety of commercial EMC standards. VPI Labs has the capability to perform conducted emissions testing in the frequency range of 30 Hz to 30 MHz and radiated emissions testing in the range of 9 kHz to 40 GHz.

VPI Laboratories EMC test facility is in compliance with all the current national and international requirements and is accredited by the US National Institute for Standards and Technology (NIST) National Voluntary Laboratory Accreditation Program (NVLAP) (Lab Code: 100272) under Electromagnetic Compatibility and Telecommunications.

Map to Wanship Facility

Get in Touch with VPI Laboratories to Discuss Electronic Testing Solutions for Your Product Today

VPI provides conformity assessment services that assist you in complying with regulatory requirements to help your product get to market. With over 40 years of experience, our lab and resources are equipped to meet your testing requirements. As technology is innovated, regulations change; our knowledge and experience help your product’s compliance and certification testing go smoothly. VPI test lab engineers have extensive knowledge in EMC/EMI testing to help guide you through your electronic product testing needs.

VPI has demonstrated its competence to perform regulatory compliance testing by being accredited by the U.S. Department of Commerce, National Voluntary Laboratory Accreditation Program (NVLAP) (Lab Code 100272-0).

Contact us to discuss your regulatory compliance needs with one of our experienced engineers.